Model HF-35AB
Max input power 35KW
Max. input current 55A
Heating current 10-70A
Output frequency 30-80KHz
Input voltage 380 VAC 3-phase, 50/60Hz
Duty cycle 100%
Auto heating/retaining/cooling timers 1-99 seconds
Water pressure ≥ 0.2 Mpa (29 PSI) you may use tap water and water pump (>1/4HP & >240 Gph)
Water flow ≥6L/min (1.6 gallons)
Water temperature <40°C
Product size (L x W x H) Generator 520x250x530mm
Transforme 390x260x430mm
Net weight Generator 35kg
Transformer 33kg
Packing size 710 x 660 x 760mm
Packing weight 89kg

Heat treatment of gear and shaft

Brazing of diamond tools

Brazing of electrical kettle bottom

Tube heating for coating

Heating of stainless steel vessel for annealing

Brazing of machining tools

Melting of all kinds of metals

Brazing of copper & brass tube and connectors in air conditioner manufacturing factories and so on.

Heating of rods for forging

Quenching of parts.



IGBT module and inverting technologies, better performance ,higher reliability and lower maintenance cost;

100% duty cycle, continuous working is allowed at maximum power output;

Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;

Display of heating power and heating current and oscillating frequency;

Multi-display functions, with displays of over current, over voltage, water failure, phase failure and unfit lad and so on, machine can be protected from destroys and machines can be repaired easily.

Simple to install, installation can be done by unprofessional person very easily, connection water and power can be finished in a few minutes.

Light weight, small size.

Different shape and size of induction coil can be changed easily to heat different parts.

Advantages of the model with timer: the power and the operating time of the heating period and retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

The separated models are designed to fit the dirty surroundings, the generator can be put in a clean space to increase the reliability; with the small size and light weight of the separated transformer, it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.


There are no reviews yet.

Be the first to review “HF-35AB”

Your email address will not be published. Required fields are marked *