UF-10A-I

Category:
Model UF-10A-I
Working frequency 50-300KHz
Max input power 10KW
Max. input current 15A
Heating current 3-28A
Input voltage 3Phase 380V 50/60Hz
Duty cycle 100%
Auto timer 0.1-99.9seconds
Water pressure ≥ 0.2 Mpa
Water flow ≥3L/min
Water temperature <35°C
Generator size 520x260x450
N.W. 29kg
Packing size 690x385x630mm
Packing weight 56kg

Brazing carbide tools.

heating of small wire.

surface quenching.

Brazing for tiny workpiece.

Heating tiny workpiece.

steel and stainless steel screw coating.

copper joint brazing.

Stainless steel strip annealing etc.

floating melt for institute or college research .

tiny or powder material melting.

Description

With high frequency up to 300KHZ the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.

IGBT and current inverting technologies have been used; higher reliability and lower maintenance cost.

100% duty cycle, continuous working is allowed at maximum power output.

Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;

Display of heating power and heating current and oscillating frequency.

Simple to install , installation can be done by unprofessional person very easily;

Light weight, small size;

Different shape and size of induction coil can be changed easily to heat different parts.

Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

Reviews

There are no reviews yet.

Be the first to review “UF-10A-I”

Your email address will not be published. Required fields are marked *