Model UF-20AB
Max input power 20KW
Max. input current 30A
Heating current 5-45A
Working frequency 50-250KHz
Input voltage 380 VAC 3phase, 50/60Hz
Duty cycle 100%
Auto timers 0.1-99.9 seconds
Water pressure ≥ 0.2 Mpa
Water flow ≥6L/min
Water temperature <40°C
size Generator: 520x260x450mm
Transformer 400x260x370mm
Net weight Generator: 28 kg
Transformer 16kg
Packing size 710x660x760mm
Packing weight 88kg

Heat treatment of gear and shaft

Steel and stainless steel screw coating

Floating melt for institute or college research

Tiny or powder material melting

Copper joint brazing



With high frequency up to 250KHZ , and very thin and tiny parts can be easily heated.

IGBT and current inverting technologies have been used; higher reliability and lower maintenance cost.

100% duty cycle, continuous working is allowed at maximum power output.

Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;

Display of heating power and heating current and oscillating frequency.

Simple to install , installation can be done by unprofessional person very easily;

Light weight, small size;

Different shape and size of induction coil can be changed easily to heat different parts.

Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.


There are no reviews yet.

Be the first to review “UF-20AB”

Your email address will not be published. Required fields are marked *