|Max input power||40KW|
|Max. input current||60A|
|Input voltage||380 VAC 3phase, 50/60Hz|
|Auto timers||0.1-99.9 seconds|
|Water pressure||≥ 0.2 Mpa|
|Net weight||Generator:||50 kg|
Heat treatment of gear and shaft
Steel and stainless steel screw coating
Annealing of wires and rods.
With high frequency up to 200KHZ , and very thin and tiny parts can be easily heated.
IGBT and current inverting technologies have been used; higher reliability and lower maintenance cost.
100% duty cycle, continuous working is allowed at maximum power output.
Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
Display of heating power and heating current and oscillating frequency.
Simple to install , installation can be done by unprofessional person very easily;
Light weight, small size;
Different shape and size of induction coil can be changed easily to heat different parts.
Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.